Why does my skateboard wobble

When it moves move with it. Another solution is to carve it out. If your board begins to wobble simply start a light carve back and forth. What this does is naturally relaxes your muscles but at a cost to your speed. Another factor of speed wobbles could be an improper sized board. Getting a board that is the right length for both your height and for your style of riding is very important.

If your board is too short for you, you will experience some problems and one of them will be speed wobbles. Solution: Make sure your board is the proper size for your height. If you have a really long board, adjust your riding style and make sure your stance keeps your weight neutral over the center of the board.

Posted by Andrew. Labels: skateboard , skateboard tips , skateboard wobbles , speed wobbles. Muhammad Hassan May 21, at AM. Newer Post Older Post Home. Hit us up at help stokedrideshop. Nearly all speed boarders run a lower angle at the rear, so that the turning comes from the front and deadens the rear.

This will also lower the chances of you getting wheel bite. The split baseplate angle works a lot better than if you also lower the baseplate angle at the front.

The dampening effect comes from the rear turning less that the front. Lastly a good analogy for speed wobbles is balancing on a slack line. You can get the wobbles there too especially when on one foot. Anything that changes the frequency or dampens it, is good. I greatful that this is here, just knowing that this has been a contact problem helps.

Hello, That was a very informative article about speed wobbles. So, what I do when I encounter a decline and I feel myself begin to freak out is to very slowly put my foot down to slow down. I live in Brooklyn, New York and the size and design of the wheel ensures that pebbles and uneven gaps in the sidewalk will not send me flying.

Reading this article I learned that what I can do once I start going downhill is to change my stance on the board. Since I do a great deal of tick tacking, my feet tend to be parallel to the wheels instead of, as you described in the article, having the front foot planted perpendicular to the wheels, and the rear foot resting on the ball of the foot. I often take my skateboard to nearby Prospect Park and make an attempt at coasting down one of the serious hills, but, I get the wobbles and I quickly put a foot down or jump off.

Well, I do one trick. I use my board primarily as a form of transportation. On a flat, and going up hills instead of merely pushing off with a foot repeatedly I tick-tack to gain velocity. Currently bandaged up haha but I attempted to ride the curves, which turned into VERY wide curves unlike the small back and forth wobble and i think the board or my brain might have thrown me off.

Ate gravel. But definitely understand what I need to improve on, just very disappointed that I could have made it down without falling! About Stoked In , as a high school student, I founded Stoked with a focus on making sure the customer received exactly the kind of ride they wanted. Avoid the Deadly Speed Wobble! Older Post. Newer Post. Posted on Jul 13, by Diogo. Hope this helps someone out there.. If it did I would love to hear about it! Posted on Jul 13, by Ben.

Posted on Jul 13, by Marcus Allison. Posted on Jul 13, by Sarah. Posted on Jul 13, by Mike. Great read. Gained more perspective even after 30yrs of being on a board. Never stop learning. Your Name. Your Email. Your Comment. Close Customer Login:. Forgot your password? Create An Account. Close Shopping Cart:. Your cart is currently empty. To solve this you need to remove the kingpin nut and truck hanger. Washers are very cheap, just make sure to pick the right size. Ask your local skate shop or use online customer service, they will help you out.

Most of the problems here mention can be solved by adjusting or replacing the skateboard bushings. This is quite easy, especially if you have a skate tool. Beginners will have a harder time learning to ride a skateboard with loose trucks.

After all, a more stable board will help you keep your balance. Adjusting the tightness of the trucks will solve your problem. If you still feel like the trucks are too loose you should get harder bushings. This will render the bushings useless. If interested, follow me on Instagram or subscribe to my Youtube Channel. I'm an aged skateboarder, but I still shred responsibly. I started skateboarding 25 years ago and I'm out there whenever I can.

It's been a while since I reviewed a skateboard, this time I tested the Landyacht ATV and I know many of you are curious about this board. To be honest, I wasn't that impressed mainly because it's After testing many bearings over a year in different circumstances and weather types, we came to the conclusion that the best skateboard bearings are not the most expensive bearings.